This page does not review anything Status Audio makes. It counts one thing: how much of what this database says about their products came out of their own documents, and how much had to be worked out or left blank.
| Model | Impedance | Sensitivity | Source of the figure |
|---|---|---|---|
| CB-1 | 32 Ω | 102.0 dB | Not published |
Impedance is almost always printed. Sensitivity is the one that goes wrong, because a decibel figure means two very different things depending on whether it is per milliwatt or per volt — about five decibels apart at 300 Ω and eighteen at 16 Ω. The conversion is here.
The Status Audio CB-1 needs 0.63 mW and 0.14 V for a 100 dB SPL peak at 32 Ω.
280 of the 280 sources here reach 100 dB on it, and the cheapest of them is the Apple USB-C dongle (EU) at $9. “Reaches” means the maker’s own published power figure is enough at that load; it is not a judgement of how it sounds.
Their lowest impedance is the Status Audio CB-1 at 32 Ω, so a source wants an output impedance at or below 4.0 Ω to satisfy the one-eighth rule on everything they make. 134 of the 169 sources that publish an output impedance manage that.
These counts use figures the source makers published themselves. A product that publishes nothing is not counted as a pass anywhere above, which is why the three numbers differ so much. The collection matcher runs the same arithmetic over whatever you actually own.