Both are audio interfaces, $149 against $139. This page puts them side by side on the only three things a maker can be held to — power, output impedance and noise — and then asks the question that actually matters: which headphones do they treat differently?
The Arturia MiniFuse 1 reaches 100 dB on 562 of the 567 models here, the Focusrite Scarlett Solo 4th gen on 552.
| Specification | Arturia MiniFuse 1 | Focusrite Scarlett Solo 4th gen |
|---|---|---|
| Power into 32Ω | 139 mW | 31 mW |
| Power into 150Ω | 45 mW | 19 mW |
| Power into 300Ω | 24 mW | 22 mW |
| Power into 600Ω | 12 mW | 11 mW |
| Output impedance | 10 Ω | 50 Ω |
| Output noise | not published | not published |
| Price | $149 | $139 |
| Headphones it reaches 100 dB on out of 567 | 562 | 552 |
A figure marked not published is missing from the maker’s own material, which is not the same as being good or bad. Where one of these two publishes a number and the other does not, the comparison on that axis cannot be made at all — and saying so is more useful than guessing.
| Load | Arturia MiniFuse 1 | Focusrite Scarlett Solo 4th gen |
|---|---|---|
| 32 Ω | Derived | Derived |
| 150 Ω | Derived | Derived |
| 300 Ω | Derived | Published |
| 600 Ω | Derived | Derived |
Only one of these two columns starts from a power rating. Focusrite Scarlett Solo 4th gen publishes one at 300 Ω; Arturia MiniFuse 1 publishes none at any of these four loads, so its column is worked out from power it published at other loads. Both are arithmetic on a maker’s own figures rather than guesses, and the method used for the Arturia MiniFuse 1 understates rather than flatters — but at 300 Ω is the only load here at which its maker can be held to a figure.
What each of these labels means, and why a derived figure is still worth printing, is set out in how this data was built.
10 headphones reach 100 dB on the Arturia MiniFuse 1 but not on the Focusrite Scarlett Solo 4th gen — HiFiMAN HE-6se V2, HiFiMAN HE6 Remastered, HiFiMAN Susvara, 7 more.
51 headphones are left alone by the Arturia MiniFuse 1 under the one-eighth rule but coloured by the Focusrite Scarlett Solo 4th gen (AKG K612 Pro, Audeze LCD-3, Audeze LCD-4, 48 more).
552 of the 567 models here reach 100 dB on both. That is a power count and nothing more; whether either source suits a given headphone also depends on the two lines above.
The counts above say how many models the two treat differently. This says by how much. The same 8 headphones appear on every page of this kind, ordered from the easiest to drive to the hardest, so a row can be read across pages as well as across columns. Headroom is at a 100 dB SPL peak.
The widest gap on the list is the Campfire Audio Andromeda 2020: Arturia MiniFuse 1 has +10 dB of headroom there against +3 dB. 7 dB is about 4.5 times the power, which matters for peaks rather than for how loud the music sits.
The hiss columns are empty for Arturia MiniFuse 1 and Focusrite Scarlett Solo 4th gen because neither maker publishes no output noise figure. That is a gap in the specification, not a quiet amplifier, and it is left blank here rather than filled with a plausible number.
| Headphone | Impedance | Needs | Arturia MiniFuse 1 headroom | Focusrite Scarlett Solo 4th gen headroom | Arturia MiniFuse 1 hiss | Focusrite Scarlett Solo 4th gen hiss |
|---|---|---|---|---|---|---|
| Shure SE846 | 9 Ω | 0.04 mW | +30 dB damping | +23 dB damping | not published | not published |
| Campfire Audio Andromeda 2020 | 9 Ω | 4.0 mW | +10 dB damping | +3 dB damping | not published | not published |
| Audeze LCD-2 Classic | 70 Ω | 0.79 mW | +20 dB damping | +14 dB damping | not published | not published |
| Beyerdynamic DT 1990 Pro (250Ω) | 250 Ω | 0.63 mW | +17 dB | +15 dB damping | not published | not published |
| HiFiMAN HE400se | 25 Ω | 7.9 mW | +11 dB damping | +5 dB damping | not published | not published |
| Audio-Technica ATH-R70X | 470 Ω | 1.6 mW | +10 dB | +9 dB | not published | not published |
| Sennheiser HD 600 | 300 Ω | 6.6 mW | +6 dB | +5 dB damping | not published | not published |
| HiFiMAN Susvara | 60 Ω | 50 mW | +2 dB damping | -3 dB damping | not published | not published |
The Arturia MiniFuse 1 costs $10 more than the Focusrite Scarlett Solo 4th gen. Out of the 567 models here, that difference buys 10 more models driven to 100 dB and 51 more models left alone under the one-eighth rule.
Nothing runs the other way: there is no axis here on which the cheaper of the two does better.
Everything in this paragraph counts only figures the two makers published. An advantage on an axis one of them leaves blank cannot be counted, and is not counted — how often that happens is its own page.
Each has a page of its own with every power figure traced to what the maker published and a full headphone list: Arturia MiniFuse 1 and Focusrite Scarlett Solo 4th gen. Or put either against your own headphones in the source comparison tool.