Both are audio interfaces, $349 against $720. This page puts them side by side on the only three things a maker can be held to — power, output impedance and noise — and then asks the question that actually matters: which headphones do they treat differently?
The Audient iD14 MkII reaches 100 dB on 561 of the 567 models here, the Audient NERO on 559.
| Specification | Audient iD14 MkII | Audient NERO |
|---|---|---|
| Power into 32Ω | 112 mW | 86 mW |
| Power into 150Ω | 75 mW | 23 mW |
| Power into 300Ω | 55 mW | 13 mW |
| Power into 600Ω | 50 mW | 7.4 mW |
| Output impedance | not published | not published |
| Output noise | not published | not published |
| Price | $349 | $720 |
| Headphones it reaches 100 dB on out of 567 | 561 | 559 |
A figure marked not published is missing from the maker’s own material, which is not the same as being good or bad. Where one of these two publishes a number and the other does not, the comparison on that axis cannot be made at all — and saying so is more useful than guessing.
| Load | Audient iD14 MkII | Audient NERO |
|---|---|---|
| 32 Ω | Derived | Derived |
| 150 Ω | Derived | Derived |
| 300 Ω | Derived | Derived |
| 600 Ω | Recomputed | Published |
Only one of these two columns starts from a power rating. Audient NERO publishes one at 600 Ω; Audient iD14 MkII publishes none at any of these four loads, so its column is worked out from power it published at other loads. Both are arithmetic on a maker’s own figures rather than guesses, and the method used for the Audient iD14 MkII understates rather than flatters — but at 600 Ω is the only load here at which its maker can be held to a figure.
What each of these labels means, and why a derived figure is still worth printing, is set out in how this data was built.
2 headphones reach 100 dB on the Audient iD14 MkII but not on the Audient NERO — Moondrop PARA 2, Moondrop VENUS.
559 of the 567 models here reach 100 dB on both. That is a power count and nothing more; whether either source suits a given headphone also depends on the two lines above.
The counts above say how many models the two treat differently. This says by how much. The same 8 headphones appear on every page of this kind, ordered from the easiest to drive to the hardest, so a row can be read across pages as well as across columns. Headroom is at a 100 dB SPL peak.
The widest gap on the list is the Audio-Technica ATH-R70X: Audient iD14 MkII has +15 dB of headroom there against +7 dB. 8 dB is about 5.7 times the power, which matters for peaks rather than for how loud the music sits.
The hiss columns are empty for Audient iD14 MkII and Audient NERO because neither maker publishes no output noise figure. That is a gap in the specification, not a quiet amplifier, and it is left blank here rather than filled with a plausible number.
| Headphone | Impedance | Needs | Audient iD14 MkII headroom | Audient NERO headroom | Audient iD14 MkII hiss | Audient NERO hiss |
|---|---|---|---|---|---|---|
| Shure SE846 | 9 Ω | 0.04 mW | +29 dB | +28 dB | not published | not published |
| Campfire Audio Andromeda 2020 | 9 Ω | 4.0 mW | +9 dB | +8 dB | not published | not published |
| Audeze LCD-2 Classic | 70 Ω | 0.79 mW | +22 dB | +18 dB | not published | not published |
| Beyerdynamic DT 1990 Pro (250Ω) | 250 Ω | 0.63 mW | +20 dB | +14 dB | not published | not published |
| HiFiMAN HE400se | 25 Ω | 7.9 mW | +11 dB | +10 dB | not published | not published |
| Audio-Technica ATH-R70X | 470 Ω | 1.6 mW | +15 dB | +7 dB | not published | not published |
| Sennheiser HD 600 | 300 Ω | 6.6 mW | +9 dB | +3 dB | not published | not published |
| HiFiMAN Susvara | 60 Ω | 50 mW | +4 dB | +0 dB | not published | not published |
The Audient NERO costs $371 more than the Audient iD14 MkII, and on these three axes the money buys nothing: among the 567 models here there is not one that the Audient NERO handles and the Audient iD14 MkII does not — not on power, not on the one-eighth rule, not on hiss. The traffic runs the other way: the cheaper Audient iD14 MkII drives 2 models to 100 dB that the Audient NERO does not.
Everything in this paragraph counts only figures the two makers published. An advantage on an axis one of them leaves blank cannot be counted, and is not counted — how often that happens is its own page.
Each has a page of its own with every power figure traced to what the maker published and a full headphone list: Audient iD14 MkII and Audient NERO. Or put either against your own headphones in the source comparison tool.