Both are audio interfaces, $809 against $599. This page puts them side by side on the only three things a maker can be held to — power, output impedance and noise — and then asks the question that actually matters: which headphones do they treat differently?
The SSL 12 reaches 100 dB on 567 of the 567 models here, the Audient iD44 MkII on 565.
| Specification | Audient iD44 MkII | SSL 12 |
|---|---|---|
| Power into 32Ω | 190 mW | 1.2 W |
| Power into 150Ω | 40 mW | 252 mW |
| Power into 300Ω | 42 mW | 126 mW |
| Power into 600Ω | 54 mW | 63 mW |
| Output impedance | 50 Ω | 1 Ω |
| Output noise | not published | not published |
| Price | $809 | $599 |
| Headphones it reaches 100 dB on out of 567 | 565 | 567 |
A figure marked not published is missing from the maker’s own material, which is not the same as being good or bad. Where one of these two publishes a number and the other does not, the comparison on that axis cannot be made at all — and saying so is more useful than guessing.
| Load | Audient iD44 MkII | SSL 12 |
|---|---|---|
| 32 Ω | Derived | Upper bound |
| 150 Ω | Derived | Upper bound |
| 300 Ω | Derived | Upper bound |
| 600 Ω | Published | Upper bound |
These two columns are not the same kind of number, and that matters more than the gap between them. Audient iD44 MkII publishes a power rating (at 600 Ω); SSL 12 publishes no power figure at any load, only a maximum output voltage, so every milliwatt in its column is a ceiling worked out from that voltage.
A ceiling assumes the amplifier holds that voltage into the load, and nothing on SSL 12’s own sheet says it does. It is the most flattering reading available, and it is used here only because the alternative is a blank. Where the SSL 12 column looks the stronger of the two, treat the difference as unproven rather than measured. 24 of the 280 sources here are in that position, with no published power rating at any load.
What each of these labels means, and why a derived figure is still worth printing, is set out in how this data was built.
2 headphones reach 100 dB on the SSL 12 but not on the Audient iD44 MkII — Moondrop PARA, Symphonium Titan.
546 headphones are left alone by the SSL 12 under the one-eighth rule but coloured by the Audient iD44 MkII (64 Audio Aspire 1, 64 Audio Fourte, 64 Audio Ocean, 543 more).
565 of the 567 models here reach 100 dB on both. That is a power count and nothing more; whether either source suits a given headphone also depends on the two lines above.
The counts above say how many models the two treat differently. This says by how much. The same 8 headphones appear on every page of this kind, ordered from the easiest to drive to the hardest, so a row can be read across pages as well as across columns. Headroom is at a 100 dB SPL peak.
The widest gap on the list is the HiFiMAN Susvara: SSL 12 has +11 dB of headroom there against +0 dB. 11 dB is about 12 times the power, which matters for peaks rather than for how loud the music sits.
The hiss columns are empty for Audient iD44 MkII and SSL 12 because neither maker publishes no output noise figure. That is a gap in the specification, not a quiet amplifier, and it is left blank here rather than filled with a plausible number.
| Headphone | Impedance | Needs | Audient iD44 MkII headroom | SSL 12 headroom | Audient iD44 MkII hiss | SSL 12 hiss |
|---|---|---|---|---|---|---|
| Shure SE846 | 9 Ω | 0.04 mW | +32 dB damping | +39 dB | not published | not published |
| Campfire Audio Andromeda 2020 | 9 Ω | 4.0 mW | +12 dB damping | +19 dB | not published | not published |
| Audeze LCD-2 Classic | 70 Ω | 0.79 mW | +18 dB damping | +28 dB | not published | not published |
| Beyerdynamic DT 1990 Pro (250Ω) | 250 Ω | 0.63 mW | +18 dB damping | +24 dB | not published | not published |
| HiFiMAN HE400se | 25 Ω | 7.9 mW | +13 dB damping | +21 dB | not published | not published |
| Audio-Technica ATH-R70X | 470 Ω | 1.6 mW | +15 dB | +17 dB | not published | not published |
| Sennheiser HD 600 | 300 Ω | 6.6 mW | +8 dB damping | +13 dB | not published | not published |
| HiFiMAN Susvara | 60 Ω | 50 mW | +0 dB damping | +11 dB | not published | not published |
The Audient iD44 MkII costs $210 more than the SSL 12, and on these three axes the money buys nothing: among the 567 models here there is not one that the Audient iD44 MkII handles and the SSL 12 does not — not on power, not on the one-eighth rule, not on hiss. The traffic runs the other way: the cheaper SSL 12 drives 2 models to 100 dB and leaves 546 alone under the one-eighth rule that the Audient iD44 MkII does not.
Everything in this paragraph counts only figures the two makers published. An advantage on an axis one of them leaves blank cannot be counted, and is not counted — how often that happens is its own page.
Each has a page of its own with every power figure traced to what the maker published and a full headphone list: Audient iD44 MkII and SSL 12. Or put either against your own headphones in the source comparison tool.