Both are audio interfaces, $250 against $249. This page puts them side by side on the only three things a maker can be held to — power, output impedance and noise — and then asks the question that actually matters: which headphones do they treat differently?
The Tascam US-4x4HR reaches 100 dB on 553 of the 567 models here, the Focusrite Vocaster Two on 550.
| Specification | Focusrite Vocaster Two | Tascam US-4x4HR |
|---|---|---|
| Power into 32Ω | 27 mW | 45 mW |
| Power into 150Ω | 10 mW | 36 mW |
| Power into 300Ω | 7.7 mW | 24 mW |
| Power into 600Ω | 3.8 mW | 14 mW |
| Output impedance | not published | 51.5 Ω |
| Output noise | not published | not published |
| Price | $250 | $249 |
| Headphones it reaches 100 dB on out of 567 | 550 | 553 |
A figure marked not published is missing from the maker’s own material, which is not the same as being good or bad. Where one of these two publishes a number and the other does not, the comparison on that axis cannot be made at all — and saying so is more useful than guessing.
| Load | Focusrite Vocaster Two | Tascam US-4x4HR |
|---|---|---|
| 32 Ω | Derived | Published |
| 150 Ω | Derived | Derived |
| 300 Ω | Derived | Derived |
| 600 Ω | Derived | Derived |
Only one of these two columns starts from a power rating. Tascam US-4x4HR publishes one at 32 Ω; Focusrite Vocaster Two publishes none at any of these four loads, so its column is worked out from power it published at other loads. Both are arithmetic on a maker’s own figures rather than guesses, and the method used for the Focusrite Vocaster Two understates rather than flatters — but at 32 Ω is the only load here at which its maker can be held to a figure.
What each of these labels means, and why a derived figure is still worth printing, is set out in how this data was built.
3 headphones reach 100 dB on the Tascam US-4x4HR but not on the Focusrite Vocaster Two — HiFiMAN Susvara Unveiled, Kinera Freya Vanir, Thieaudio Hype 10.
550 of the 567 models here reach 100 dB on both. That is a power count and nothing more; whether either source suits a given headphone also depends on the two lines above.
The counts above say how many models the two treat differently. This says by how much. The same 8 headphones appear on every page of this kind, ordered from the easiest to drive to the hardest, so a row can be read across pages as well as across columns. Headroom is at a 100 dB SPL peak.
The widest gap on the list is the Audio-Technica ATH-R70X: Tascam US-4x4HR has +10 dB of headroom there against +5 dB. 5 dB is about 3.4 times the power, which matters for peaks rather than for how loud the music sits.
The hiss columns are empty for Focusrite Vocaster Two and Tascam US-4x4HR because neither maker publishes no output noise figure. That is a gap in the specification, not a quiet amplifier, and it is left blank here rather than filled with a plausible number.
| Headphone | Impedance | Needs | Focusrite Vocaster Two headroom | Tascam US-4x4HR headroom | Focusrite Vocaster Two hiss | Tascam US-4x4HR hiss |
|---|---|---|---|---|---|---|
| Shure SE846 | 9 Ω | 0.04 mW | +23 dB | +25 dB damping | not published | not published |
| Campfire Audio Andromeda 2020 | 9 Ω | 4.0 mW | +3 dB | +5 dB damping | not published | not published |
| Audeze LCD-2 Classic | 70 Ω | 0.79 mW | +13 dB | +16 dB damping | not published | not published |
| Beyerdynamic DT 1990 Pro (250Ω) | 250 Ω | 0.63 mW | +11 dB | +16 dB damping | not published | not published |
| HiFiMAN HE400se | 25 Ω | 7.9 mW | +4 dB | +6 dB damping | not published | not published |
| Audio-Technica ATH-R70X | 470 Ω | 1.6 mW | +5 dB | +10 dB | not published | not published |
| Sennheiser HD 600 | 300 Ω | 6.6 mW | +1 dB | +6 dB damping | not published | not published |
| HiFiMAN Susvara | 60 Ω | 50 mW | -5 dB | -1 dB damping | not published | not published |
The Focusrite Vocaster Two costs $1 more than the Tascam US-4x4HR, and on these three axes the money buys nothing: among the 567 models here there is not one that the Focusrite Vocaster Two handles and the Tascam US-4x4HR does not — not on power, not on the one-eighth rule, not on hiss. The traffic runs the other way: the cheaper Tascam US-4x4HR drives 3 models to 100 dB that the Focusrite Vocaster Two does not.
Everything in this paragraph counts only figures the two makers published. An advantage on an axis one of them leaves blank cannot be counted, and is not counted — how often that happens is its own page.
Each has a page of its own with every power figure traced to what the maker published and a full headphone list: Focusrite Vocaster Two and Tascam US-4x4HR. Or put either against your own headphones in the source comparison tool.