The Campfire Audio Andromeda 2020 is 9Ω at 94.0 dB (no figure from the maker at all); the Etymotic ER4XR is 45Ω at 98.0 dB/mW. This page is only about what they ask of an amplifier — not how they sound, which no specification on either sheet can tell you.
The Campfire Audio Andromeda 2020 needs 4.0 dB more than the Etymotic ER4XR to reach the same loudness — 4.0 mW against 1.6 mW.
| Specification | Campfire Audio Andromeda 2020 | Etymotic ER4XR |
|---|---|---|
| Impedance | 9 Ω | 45 Ω |
| Sensitivity | 94.0 dB | 98.0 dB/mW |
| Sensitivity (voltage) | 114.5 dB/V | 111.5 dB/V |
| Power for 100 dB | 4.0 mW | 1.6 mW |
| Voltage for 100 dB | 0.19 V | 0.27 V |
| Current for 100 dB | 21.0 mA | 5.9 mA |
| Highest source impedance that leaves them alone (one-eighth rule) | 1.12 Ω | 5.62 Ω |
| Sources that reach 100 dB out of 280 | 279 | 280 |
One caution before reading the rows. For Campfire Audio Andromeda 2020 the maker publishes no sensitivity figure at all. The number in the table was collected when this database was first built and has never been traced to a manufacturer document, so treat every row below it as an estimate rather than a specification.
1 of the 280 sources has the power for the Etymotic ER4XR but not for the Campfire Audio Andromeda 2020 — Steinberg UR22C.
12 sources are low enough in output impedance for the Etymotic ER4XR under the one-eighth rule but not for the Campfire Audio Andromeda 2020 (FiiO KA13, FiiO K11, Schiit Vali 2+, 9 more).
1 source stays below the audible-hiss threshold with the Etymotic ER4XR but crosses it with the Campfire Audio Andromeda 2020 (Schiit Mjolnir 3).
279 of the 280 sources here reach 100 dB on both. That count is about power only — the output-impedance and hiss lines above are separate questions, and a source can pass this one and fail those.
The gap between these two in decibels does not change with volume — it is a property of the two headphones. What changes is the size of the numbers, and it changes fast: every 10 dB costs ten times the power. The row that matters is the one nearest the level you listen at, and for most people that is nearer the top of this table than the bottom.
The Etymotic ER4XR is more demanding than 69% of the 567 non-electrostatic models in this database; the Campfire Audio Andromeda 2020 than 56%. Both figures use the same measure as the rest of the site: whichever runs out first against a 2 V, 100 mW dongle, voltage or power.
| dB SPL | Campfire Audio Andromeda 2020 power | Campfire Audio Andromeda 2020 voltage | Etymotic ER4XR power | Etymotic ER4XR voltage |
|---|---|---|---|---|
| 80 | 0.04 mW | 19 mV | 0.02 mW | 27 mV |
| 85 | 0.13 mW | 34 mV | 0.05 mW | 47 mV |
| 90 | 0.40 mW | 60 mV | 0.16 mW | 84 mV |
| 95 | 1.3 mW | 0.11 V | 0.50 mW | 0.15 V |
| 100 | 4.0 mW | 0.19 V | 1.6 mW | 0.27 V |
| 105 | 13 mW | 0.34 V | 5.0 mW | 0.47 V |
105 dB is included because forum power figures are usually quoted there or higher. It is also a level that damages hearing in minutes — how many minutes is its own calculator.
| Source | Price | Headroom, Campfire Audio Andromeda 2020 | Headroom, Etymotic ER4XR | Output impedance | Noise |
|---|---|---|---|---|---|
| JadeAudio JA11 | $20 | 3.3 dB | 11.3 dB | 0.5 Ω | 1.7 µV |
| FiiO KA11 | $29 | 15.4 dB | 19.5 dB | 0.7 Ω | 1.7 µV |
| FiiO BTR11 | $36 | 8.0 dB | 11.3 dB | 0.5 Ω | 8.0 µV |
Of the 280 sources here, 279 reach 100 dB on both. That is the easy axis. 62 of them also publish an output impedance low enough for both under the one-eighth rule and a noise figure that stays below the audible-hiss threshold with both — the rest either fail one of those or never printed the number at all, and 207 of them are in the second group.
The cheapest of the 62 is the JadeAudio JA11, at $20. It leaves 3.3 dB of headroom on the Campfire Audio Andromeda 2020 and 11.3 dB on the Etymotic ER4XR, its output impedance is 0.5 Ω against a one-eighth limit of 1.12 Ω and 5.62 Ω, and its noise figure puts the hiss floor 21 dB and 24 dB below the 20 dB SPL this site treats as the point where a quiet room stops hiding it.
Cheapest that satisfies three published numbers is not the same as best, and none of it is about how either headphone sounds. To put either model against a source this page does not mention, or to change the target loudness, use the amplifier matcher.
| Model | As printed | Tolerance | Standard |
|---|---|---|---|
| Campfire Audio Andromeda 2020 | nothing printed | — | — |
| Etymotic ER4XR | 20 Hz – 16 kHz | not printed | not printed |
Campfire Audio prints nothing at all for the Andromeda 2020. Etymotic prints 20 Hz – 16 kHz for the ER4XR.
So one side of this comparison has a frequency-response number and the other does not — which changes less than it looks. The range printed for the Etymotic ER4XR comes with no tolerance beside it, and a range without a ±dB figure says nothing about how loud the headphone is at either end of it: thirty decibels down at the bottom and the sentence would still be true. On the only reading that would have made it a specification, the two sheets say the same amount: nothing.
None of this is a measurement. What each maker publishes, and what it is worth, is set out in the frequency response audit.
Each model has a page of its own with the full source list, the hiss estimate and the provenance of every figure above: Campfire Audio Andromeda 2020 and Etymotic ER4XR. Each figure on this page is labelled on those pages with where it came from, including the ones Campfire Audio and Etymotic never published — what Campfire Audio publishes and what Etymotic publishes, both counted.