This page does not review anything Symphonium makes. It counts one thing: how much of what this database says about their products came out of their own documents, and how much had to be worked out or left blank.
| Model | Impedance | Sensitivity | Source of the figure |
|---|---|---|---|
| Crimson | 6.05 Ω | 83.8 dB/mW | Converted from per volt |
| Giant | 7 Ω | 88.5 dB/mW | Converted from per volt |
| Helios | 8.5 Ω | 83.3 dB/mW | Converted from per volt |
| Meteor | 9.7 Ω | 90.9 dB/mW | Converted from per volt |
| Titan | 3 Ω | 79.8 dB/mW | Converted from per volt |
| Triton | 8.3 Ω | 86.2 dB/mW | Converted from per volt |
| Zenith | 6.1 Ω | 85.9 dB/mW | Converted from per volt |
Impedance is almost always printed. Sensitivity is the one that goes wrong, because a decibel figure means two very different things depending on whether it is per milliwatt or per volt — about five decibels apart at 300 Ω and eighteen at 16 Ω. The conversion is here.
| Model | As printed | Tolerance | Standard |
|---|---|---|---|
| Crimson | 10Hz - 24kHz, ± 2 dB | ±2 dB | not printed |
| Giant | 5Hz - 18kHz, ± 2 dB | ±2 dB | not printed |
| Helios | 12Hz - 24kHz, ± 2 dB | ±2 dB | not printed |
| Meteor | 12Hz - 21kHz, ± 3 dB | ±3 dB | not printed |
| Titan | 8Hz - 24kHz, ± 2 dB | ±2 dB | not printed |
| Triton | 11Hz - 21kHz, ± 3 dB | ±3 dB | not printed |
| Zenith | 10Hz - 20kHz, ± 2 dB | ±2 dB | not printed |
Symphonium prints a frequency range for all 7 models here whose sheets have been read.
Every one of those ranges carries a tolerance in decibels. That is rare enough to be the most useful sentence on this page: across the whole database only 58 of the 490 models with a printed range have one.
Every range stands under the same heading, give or take a capital letter: “Frequency Response”.
No measurement is published here — only what was printed. The whole count, maker by maker, is in the frequency response audit.
The hardest of the 7 to drive is the Symphonium Titan: 105 mW and 0.56 V for a 100 dB SPL peak. Their impedances run from 3 to 9.7 Ω, which matters because the voltage a headphone wants rises with impedance while the power falls.
85 of the 280 sources here reach 100 dB on all 7, and the cheapest of them is the Schiit Magni Heresy at $99. “Reaches” means the maker’s own published power figure is enough at that load; it is not a judgement of how it sounds.
On hiss the count is smaller, because most of the industry does not publish a noise figure at all: of the 83 sources here that do, 83 stay under the threshold of hearing on all 7 of their in-ears. The one to watch is the Symphonium Meteor at 111 dB/V — the more sensitive the in-ear, the more of the amplifier’s own noise you hear.
Their lowest impedance is the Symphonium Titan at 3 Ω, so a source wants an output impedance at or below 0.37 Ω to satisfy the one-eighth rule on everything they make. 55 of the 169 sources that publish an output impedance manage that.
These counts use figures the source makers published themselves. A product that publishes nothing is not counted as a pass anywhere above, which is why the three numbers differ so much. The collection matcher runs the same arithmetic over whatever you actually own.
Almost everything this site says about Symphonium came from them. That is not the normal case and it is worth saying out loud.
The rule used here is the same for every maker and is described on the manufacturer index. Every figure behind it can be opened on the product page it came from, with the document it came from linked.