The Beyerdynamic DT 880 Edition (600Ω) is 600Ω at 96.0 dB (no reference unit printed); the ZMF Verite Closed is 300Ω at 99.0 dB/mW. This page is only about what they ask of an amplifier — not how they sound, which no specification on either sheet can tell you.
The Beyerdynamic DT 880 Edition (600Ω) needs 3.0 dB more than the ZMF Verite Closed to reach the same loudness — 2.5 mW against 1.3 mW.
| Specification | Beyerdynamic DT 880 Edition (600Ω) | ZMF Verite Closed |
|---|---|---|
| Impedance | 600 Ω | 300 Ω |
| Sensitivity | 96.0 dB | 99.0 dB/mW |
| Sensitivity (voltage) | 98.2 dB/V | 104.2 dB/V |
| Power for 100 dB | 2.5 mW | 1.3 mW |
| Voltage for 100 dB | 1.23 V | 0.61 V |
| Current for 100 dB | 2.0 mA | 2.0 mA |
| Highest source impedance that leaves them alone (one-eighth rule) | 75.00 Ω | 37.50 Ω |
| Sources that reach 100 dB out of 280 | 266 | 280 |
One caution before reading the rows. Beyerdynamic DT 880 Edition (600Ω) printed a decibel figure with no reference unit, so this page reads it as per milliwatt. If it is really per volt, that model needs far more than the table says. Why the two readings differ by so much.
14 of the 280 sources have the power for the ZMF Verite Closed but not for the Beyerdynamic DT 880 Edition (600Ω) — Apple USB-C dongle (US), Apple USB-C dongle (EU), JadeAudio JA11, 11 more.
14 sources are low enough in output impedance for the Beyerdynamic DT 880 Edition (600Ω) under the one-eighth rule but not for the ZMF Verite Closed (Audient EVO 4, ART HeadAmp 4 Pro, Focusrite Scarlett Solo 4th gen, 11 more).
266 of the 280 sources here reach 100 dB on both. That count is about power only — the output-impedance and hiss lines above are separate questions, and a source can pass this one and fail those.
The gap between these two in decibels does not change with volume — it is a property of the two headphones. What changes is the size of the numbers, and it changes fast: every 10 dB costs ten times the power. The row that matters is the one nearest the level you listen at, and for most people that is nearer the top of this table than the bottom.
The Beyerdynamic DT 880 Edition (600Ω) is more demanding than 98% of the 567 non-electrostatic models in this database; the ZMF Verite Closed than 91%. Both figures use the same measure as the rest of the site: whichever runs out first against a 2 V, 100 mW dongle, voltage or power.
| dB SPL | Beyerdynamic DT 880 Edition (600Ω) power | Beyerdynamic DT 880 Edition (600Ω) voltage | ZMF Verite Closed power | ZMF Verite Closed voltage |
|---|---|---|---|---|
| 80 | 0.03 mW | 0.12 V | 0.01 mW | 61 mV |
| 85 | 0.08 mW | 0.22 V | 0.04 mW | 0.11 V |
| 90 | 0.25 mW | 0.39 V | 0.13 mW | 0.19 V |
| 95 | 0.79 mW | 0.69 V | 0.40 mW | 0.35 V |
| 100 | 2.5 mW | 1.23 V | 1.3 mW | 0.61 V |
| 105 | 7.9 mW | 2.18 V | 4.0 mW | 1.09 V |
105 dB is included because forum power figures are usually quoted there or higher. It is also a level that damages hearing in minutes — how many minutes is its own calculator.
| Source | Price | Headroom, Beyerdynamic DT 880 Edition (600Ω) | Headroom, ZMF Verite Closed | Output impedance | Noise |
|---|---|---|---|---|---|
| FiiO KA11 | $29 | 6.4 dB | 12.4 dB | 0.7 Ω | 1.7 µV |
| FiiO BTR13 | $59 | 3.0 dB | 9.0 dB | 0.6 Ω | 1.0 µV |
| iBasso DC03 Pro | $69 | 3.2 dB | 9.2 dB | 0.12 Ω | 0.9 µV |
Of the 280 sources here, 266 reach 100 dB on both. That is the easy axis. 69 of them also publish an output impedance low enough for both under the one-eighth rule and a noise figure that stays below the audible-hiss threshold with both — the rest either fail one of those or never printed the number at all, and 197 of them are in the second group.
The cheapest of the 69 is the FiiO KA11, at $29. It leaves 6.4 dB of headroom on the Beyerdynamic DT 880 Edition (600Ω) and 12.4 dB on the ZMF Verite Closed, its output impedance is 0.7 Ω against a one-eighth limit of 75.00 Ω and 37.50 Ω, and its noise figure puts the hiss floor 37 dB and 31 dB below the 20 dB SPL this site treats as the point where a quiet room stops hiding it.
Cheapest that satisfies three published numbers is not the same as best, and none of it is about how either headphone sounds. To put either model against a source this page does not mention, or to change the target loudness, use the amplifier matcher.
| Model | As printed | Tolerance | Standard |
|---|---|---|---|
| Beyerdynamic DT 880 Edition (600Ω) | 5 - 35.000 Hz | not printed | not printed |
| ZMF Verite Closed | nothing printed | — | — |
Beyerdynamic prints 5 - 35.000 Hz for the DT 880 Edition (600Ω). ZMF prints nothing at all for the Verite Closed.
Beyerdynamic DT 880 Edition (600Ω): Beyerdynamic prints one range for the whole DT 880 Edition page, the same figure for every impedance version.
So one side of this comparison has a frequency-response number and the other does not — which changes less than it looks. The range printed for the Beyerdynamic DT 880 Edition (600Ω) comes with no tolerance beside it, and a range without a ±dB figure says nothing about how loud the headphone is at either end of it: thirty decibels down at the bottom and the sentence would still be true. On the only reading that would have made it a specification, the two sheets say the same amount: nothing.
None of this is a measurement. What each maker publishes, and what it is worth, is set out in the frequency response audit.
Each model has a page of its own with the full source list, the hiss estimate and the provenance of every figure above: Beyerdynamic DT 880 Edition (600Ω) and ZMF Verite Closed. Each figure on this page is labelled on those pages with where it came from, including the ones Beyerdynamic and ZMF never published — what Beyerdynamic publishes and what ZMF publishes, both counted.